Dyer Vent Cleaning - Forestall A Fire By Cleaning Your Dryer Vent

Did you know--- Only 60% of the lint is captured within the lint trap of residential and industrial garments dryers. The opposite 40% is vented outside. Over time, the damp lint accumulates to the inside of the duct. The consequence is sort of a clogged pipe that becomes more restricted over time which can cause a fire hazard! In keeping with the Nationwide Fire Protection Affiliation, sixteen,000 fires start in the laundry room every year.

Additionally, the Client Product Safety Commission estimates more than 84.four million in property damage annually. This is a reality that needs to be taken seriously. The State Fire Marshal recommends that your dryer vent be cleaned or inspected once a year to make sure your safety.


Listed here are some signs your dryer vent might want cleaning:

If it takes longer than one cycle for your clothes to dry, or the garments are extremely popular after drying, this is an effective sign your vent needs cleaning.
If the clothes have a musty smell after drying.
If your dryer shuts off or stops during a cycle, the aspect may be getting too hot from the duct restriction.
If there may be a great deal of lint escaping from the back of the dryer.
If the outside vent has lint overlaying the outside of the vent cover.
Here are the benefits of a clear dryer vent:
Reduce laundry drying times
Keep away from dryer ingredient replacement costs
Enhance the quality of dried garments
Get monetary savings on utility bills
Prevent a dryer fire!
So, how do you go about cleaning your dryer vent. Listed here are the steps when you plan to do it yourself.
1. Get the suitable tools. For this job you will need a shop vac and extension hose of at least 10 to fifteen feet, depending on the size of the dryer vent outside to your dryer. Subsequent, you'll need a versatile cable with a brush on the end (might be discovered on-line) to snake through the duct, and finally, a dust mask and gloves to protect your self from the airborne lint.

2. Disconnect your dryer from the versatile duct and clear the back of the dryer and any lint that has accrued underneath the dryer. Check the versatile duct and change it with a new one whether it is damaged or has holes. The first a part of the process will involve running the flexible cable and vacuum from the inside of the house by your dryer. The second part of the process includes the identical thing only from the outside by your dryer vent that goes to the outside.

3. Run the versatile snake with brush by means of the dryer vent duct as far as you may go, be careful to not push past any turns or angles that might cause the cable to get stuck within the ductwork, otherwise you'll have a tough time getting it out. Vacuum out the free lint with the shop vac and hose. Run the hose as far into the duct as you possibly can go.

4. Locate where your dryer duct cleaning vents to the outside of the house. Remove any dryer vent hardware to access the duct.

5. Repeat the process from the outside, running your versatile cable into the duct (toward the dryer) and vacuum out the unfastened lint. Observe this by hooking the dryer back as much as the flexible duct inside the house and switch the dryer on, any remaining lint will blow out of the duct. Finally, substitute any hardware on the outside of the house.